This page is part of archived documentation for openHAB 3.1. Go to the current stable version
# SMA Energy Meter Binding
This Binding is used to display the measured values of a SMA Energy Meter device. It shows purchased and grid feed-in power and energy.
# Supported Things
This Binding supports SMA Energy Meter devices.
The Energy Meter is discovered by receiving data on the default multicast IP address.
# Binding Configuration
No binding configuration required.
# Thing Configuration
Usually no manual configuration is required, as the multicast IP address and the port remain on their factory set values. Optionally, a refresh interval (in seconds) can be defined.
|powerInL1||Purchased power L3|
|powerInL2||Purchased power L2|
|powerInL3||Purchased power L3|
|powerOut||Grid feed-in power|
|powerOutL1||Grid feed-in power L1|
|powerOutL2||Grid feed-in power L2|
|powerOutL3||Grid feed-in power L3|
|energyInL1||Purchased energy L1|
|energyInL2||Purchased energy L2|
|energyInL3||Purchased energy L3|
|energyOut||Grid feed-in energy|
|energyOutL1||Grid feed-in energy L1|
|energyOutL2||Grid feed-in energy L2|
|energyOutL3||Grid feed-in energy L3|
# Full example