This page is part of archived documentation for openHAB 3.1. Go to the current stable version

# Velbus Binding

The Velbus binding integrates with a Velbus (opens new window) system through a Velbus configuration module (VMBRSUSB, VMB1USB or VMB1RS) or a network connection (TCP/IP).

The binding has been tested with a USB configuration module for universal mounting (VMB1USB). For optimal stability, the preferred configuration module is the VMBRSUSB module.

The binding exposes basic actions from the Velbus System that can be triggered from the smartphone/tablet interface, as defined by the Velbus Protocol info sheets (opens new window).

Supported item types are switches, dimmers and rollershutters. Pushbutton, temperature sensors and input module states are retrieved and made available in the binding.

# Supported Things

A Velbus configuration module (e.g. VMBRSUSB) or a network server (e.g. VelServer (opens new window)) is required as a "bridge" for accessing any other Velbus devices.

The supported Velbus devices are:

vmb1bl, vmb1bls, vmb1dm, vmb1led, vmb1ry, vmb1ryno, vmb1rynos, vmb1rys, vmb1ts, vmb2bl, vmb2ble, vmb2pbn, vmb4an, vmb4dc, vmb4ry, vmb4ryld, vmb4ryno, vmb6in, vmb6pbn, vmb7in, vmb8ir, vmb8pb, vmb8pbu, vmbdme, vmbdmi, vmbdmir, vmbel1, vmbel2, vmbel4, vmbelo, vmbgp1, vmbgp2, vmbgp4, vmbgp4pir, vmbgpo, vmbgpod, vmbmeteo, vmbpirc, vmbpirm, vmbpiro, vmbvp1

The type of a specific device can be found in the configuration section for things in the UI. It is part of the unique thing id which could look like:

velbus:vmb4ryld:0424e5d2:01:CH1

The thing type is the second string behind the first colon and in this example it is vmb4ryld.

# Discovery

The Velbus bridge cannot be discovered automatically. It has to be added manually by defining the serial port of the Velbus Configuration module for the Velbus Serial Bridge or by defining the IP Address and port for the Velbus Network Bridge.

Once the bridge has been added as a thing, a manual scan can be launched to discover all other supported Velbus devices on the bus. These devices will be available in the inbox. The discovery scan will also retrieve the channel names of the Velbus devices.

# Thing Configuration

The Velbus bridge needs to be added first.

For the Velbus Serial Bridge it is necessary to specify the serial port device used for communication. On Linux systems, this will usually be either /dev/ttyS0, /dev/ttyUSB0 or /dev/ttyACM0 (or a higher number than 0 if multiple devices are present). On Windows it will be COM1, COM2, etc.

In the things file, this might look e.g. like

Bridge velbus:bridge:1 [ port="COM1" ]

For the Velbus Network Bridge it is necessary to specify the IP Address or hostname and the port of the Velbus network server. This will usually be either the loopback address 127.0.0.1, and port number. Or the specific IP of the machine 10.0.0.110 , and port number.

In the things file, this might look like

Bridge velbus:networkbridge:1 "Velbus Network Bridge - Loopback" @ "Control" [ address="127.0.0.1", port=6000 ]

Optionally, both the serial bridge and the network bridge can also update the realtime clock, date and daylight savings status of the Velbus modules. This is achieved by setting the Time Update Interval (in minutes) on the bridge, e.g.:

Bridge velbus:bridge:1 [ port="COM1", timeUpdateInterval="360" ]

The default time update interval is every 360 minutes. Setting the interval to 0 minutes or leaving it empty disables the update of the realtime clock, date and daylight savings status of the Velbus modules.

In case of a connection error, the bridges can also try to reconnect automatically. You can specify at which interval the bridge should try to reconnect by setting the Reconnection Interval (in seconds), e.g.:

Bridge velbus:bridge:1 [ port="COM1", reconnectionInterval="15" ]

The default reconnection interval is 15 seconds.

For the other Velbus devices, the thing configuration has the following syntax:

Thing velbus:<thing type>:<bridgeId>:<thingId> "Label" @ "Location" [CH1="Kitchen Light", CH2="Living Light"]

or nested in the bridge configuration:

<thing type> <thingId> "Label" @ "Location" [CH1="Kitchen Light", CH2="Living Light"]

The following thing types are valid for configuration:

vmb1bl, vmb1bls, vmb1dm, vmb1led, vmb1ry, vmb1ryno, vmb1rynos, vmb1rys, vmb1ts, vmb2bl, vmb2ble, vmb2pbn, vmb4an, vmb4dc, vmb4ry, vmb4ryld, vmb4ryno, vmb6in, vmb6pbn, vmb7in, vmb8ir, vmb8pb, vmb8pbu, vmbdme, vmbdmi, vmbdmir, vmbel1, vmbel2, vmbel4, vmbelo, vmbgp1, vmbgp2, vmbgp4, vmbgp4pir, vmbgpo, vmbgpod, vmbmeteo, vmbpirc, vmbpirm, vmbpiro, vmbvp1

thingId is the hexadecimal Velbus address of the thing.

"Label" is an optional label for the thing.

@ "Location" is optional, and represents the location of the thing.

[CHx="..."] is optional, and represents the name of channel x, e.g. CH1 specifies the name of channel 1.

For thing types with builtin sensors (e.g. temperature), the interval at which the sensors should be checked can be set by specifying the Refresh Interval, e.g.:

Thing velbus:vmbelo:<bridgeId>:<thingId> [refresh="300"]

The default refresh interval for the sensors is 300 seconds. Setting the refresh interval to 0 or leaving it empty will prevent the thing from periodically refreshing the sensor values.

The following thing types support a sensor refresh interval:

vmb1ts, vmb4an, vmbel1, vmbel2, vmbel4, vmbelo, vmbgp1, vmbgp2, vmbgp4, vmbgp4pir, vmbgpo, vmbgpod, vmbmeteo, vmbpirc, vmbpirm, vmbpiro

The vmb7in thing type also supports a refresh interval. For this thing type, the refresh interval is the interval at which the counter values should be refreshed.

For dimmers the speed (in seconds) at which the modules should dim from 0% to 100% can be set by specifying the Dimspeed, e.g.:

Thing velbus:vmb4dc:<bridgeId>:<thingId> [dimspeed="5"]

The following thing types support setting the dimspeed:

vmb1dm, vmb1led, vmb4dc, vmbdme, vmbdmi, vmbdmir

# Channels

For thing types vmb1bl and vmb1bls the supported channel is CH1. UpDown, StopMove and Percent command types are supported.

For thing types vmb1dm, vmb1led, vmbdme, vmbdmi and vmbdmir the supported channel is CH1. OnOff and Percent command types are supported. Sending an ON command will switch the dimmer to the value stored when last turning the dimmer off.

For thing type vmb1ry the supported channel is CH1. OnOff command types are supported.

For thing type vmb4ry 4 channels are available CH1 ... CH4. OnOff command types are supported.

For thing types vmb1ryno, vmb1rynos, vmb4ryld and vmb4ryno 5 channels are available CH1 ... CH5. OnOff command types are supported.

For thing types vmb1rys 6 channels are available CH1 ... CH6. OnOff command types are supported on channels CH1 ... CH5. Pressed and Long_Pressed command types are supported on channel CH6. 1 trigger channel on CH6t.

The module vmb1ts has a number of channels to set the module's thermostat (thermostat:currentTemperatureSetpoint, thermostat:heatingModeComfortTemperatureSetpoint, thermostat:heatingModeDayTemperatureSetpoint, thermostat:heatingModeNightTemperatureSetpoint, thermostat:heatingModeAntiFrostTemperatureSetpoint, thermostat:coolingModeComfortTemperatureSetpoint, thermostat:coolingModeDayTemperatureSetpoint, thermostat:coolingModeNightTemperatureSetpoint, thermostat:coolingModeSafeTemperatureSetpoint, operatingMode and thermostat:mode) and thermostat trigger channels: thermostat:heater, thermostat:boost, thermostat:pump, thermostat:cooler, thermostat:alarm1, thermostat:alarm2, thermostat:alarm3, thermostat:alarm4.

For thing types vmb2bl and vmb2ble the supported channels are CH1 and CH2. UpDown, StopMove and Percent command types are supported.

For thing type vmb6in 6 channels are available CH1 ... CH6. Pressed and Long_Pressed command types are supported on channels button#CH1 ... button#CH6. 6 trigger channels on channels input#CH1 ... input#CH6.

For thing type vmb7in 8 channels are available CH1 ... CH8. Pressed and Long_Pressed command types are supported on channels button#CH1 ... button#CH8. 8 trigger channels on channels input#CH1 ... input#CH8.

For thing types vmb2pbn, vmb6pbn, vmb7in, vmb8ir, vmb8pb, vmb8pbu, vmbrfr8s and vmbvp1 8 channels are available CH1 ... CH8. Pressed and Long_Pressed command types are supported on channels button#CH1 ... button#CH8. 8 trigger channels on channels input:CH1 ... input:CH8.

Thing types vmb2pbn, vmb6pbn, vmb7in, vmb8pb, vmb8pbu, vmbrfr8s and vmbvp1 also have and 2 channels to steer the button LED feedback (feedback:CH1 and feedback:CH2). Additionally, the modules vmb2pbn, vmb6pbn, vmb7in, vmb8pbu, vmbrfr8s and vmbvp1 have a number of channels to set the module's alarms: clockAlarm:clockAlarm1Enabled, clockAlarm:clockAlarm1Type, clockAlarm:clockAlarm1WakeupHour, clockAlarm:clockAlarm1WakeupMinute, clockAlarm:clockAlarm1BedtimeHour, clockAlarm:clockAlarm1BedtimeMinute, clockAlarm:clockAlarm2Enabled, clockAlarm:clockAlarm2Type, clockAlarm:clockAlarm2WakeupHour, clockAlarm:clockAlarm2WakeupMinute, clockAlarm:clockAlarm2BedtimeHour and clockAlarm:clockAlarm2BedtimeMinute.

For thing typevmb4an 8 trigger channels are avaiable input:CH1 ... input:CH8. These channels will be triggered by the module's alarms. Four pairs of channels are available to retrieve the module's analog inputs. Each pair has a channel to retrieve the raw analog value (analogInput:CH9Raw ... analogInput:CH12Raw) and a channel to retrieve the textual analog value (analogInput:CH9 ... analogInput:CH12). Four channels are available to set the module's analog outputs analogOutput:CH13 ... analogOutput:CH16.

For thing type vmb4dc 4 channels are available CH1 ... CH4. OnOff and Percent command types are supported. Sending an ON command will switch the dimmer to the value stored when last turning the dimmer off.

For thing type vmb4ry 4 channels are available CH1 ... CH4. OnOff command types are supported.

Thing types vmbel1, vmbel2, vmbel4, vmbgp1, vmbgp2, vmbgp4, vmbgp4pir and vmbpiro have 8 trigger channels input:CH1 ... input:CH8 and one temperature channel input:CH9. Pressed and Long_Pressed command types are supported on channels button#CH1 ... button#CH8. The thing types vmbel1 and vmbgp1 have one channel to steer the button LED feedback feedback:CH1. The thing types vmbel2 and vmbgp2 have two channels to steer the button LED feedback feedback:CH1 and feedback:CH2. The thing types vmbel4, vmbgp4 and vmbgp4pir have four channels to steer the button LED feedback feedback:CH1 ... feedback:CH4. The thing type vmbpiro has a channel input:LIGHT indicating the illuminance. Thing types vmbel1, vmbel2, vmbel4, vmbgp1, vmbgp2, vmbgp4 and vmbgp4pir have a number of channels to set the module's alarms: clockAlarm:clockAlarm1Enabled, clockAlarm:clockAlarm1Type, clockAlarm:clockAlarm1WakeupHour, clockAlarm:clockAlarm1WakeupMinute, clockAlarm:clockAlarm1BedtimeHour, clockAlarm:clockAlarm1BedtimeMinute, clockAlarm:clockAlarm2Enabled, clockAlarm:clockAlarm2Type, clockAlarm:clockAlarm2WakeupHour, clockAlarm:clockAlarm2WakeupMinute, clockAlarm:clockAlarm2BedtimeHour and clockAlarm:clockAlarm2BedtimeMinute. Thing types vmbel1, vmbel2, vmbel4, vmbgp1, vmbgp2, vmbgp4 and vmbgp4pir also have a number of channels to set the module's thermostat (thermostat:currentTemperatureSetpoint, thermostat:heatingModeComfortTemperatureSetpoint, thermostat:heatingModeDayTemperatureSetpoint, thermostat:heatingModeNightTemperatureSetpoint, thermostat:heatingModeAntiFrostTemperatureSetpoint, thermostat:coolingModeComfortTemperatureSetpoint, thermostat:coolingModeDayTemperatureSetpoint, thermostat:coolingModeNightTemperatureSetpoint, thermostat:coolingModeSafeTemperatureSetpoint, operatingMode and thermostat:mode) and thermostat trigger channels: thermostat:heater, thermostat:boost, thermostat:pump, thermostat:cooler, thermostat:alarm1, thermostat:alarm2, thermostat:alarm3, thermostat:alarm4.

Thing types vmbelo, vmbgpo and vmbgpod have 32 trigger channels input:CH1 ... input:CH32 and one temperature channel input:CH33. Pressed and Long_Pressed command types are supported on channels button#CH1 ... button#CH32. They have have 32 channels to steer the button LED feedback feedback:CH1 ... feedback:CH32. They have a number of channels to set the module's alarms: clockAlarm:clockAlarm1Enabled, clockAlarm:clockAlarm1Type, clockAlarm:clockAlarm1WakeupHour, clockAlarm:clockAlarm1WakeupMinute, clockAlarm:clockAlarm1BedtimeHour, clockAlarm:clockAlarm1BedtimeMinute, clockAlarm:clockAlarm2Enabled, clockAlarm:clockAlarm2Type, clockAlarm:clockAlarm2WakeupHour, clockAlarm:clockAlarm2WakeupMinute, clockAlarm:clockAlarm2BedtimeHour and clockAlarm:clockAlarm2BedtimeMinute. They have a number of channels to set the module's thermostat thermostat (thermostat:currentTemperatureSetpoint, thermostat:heatingModeComfortTemperatureSetpoint, thermostat:heatingModeDayTemperatureSetpoint, thermostat:heatingModeNightTemperatureSetpoint, thermostat:heatingModeAntiFrostTemperatureSetpoint, thermostat:coolingModeComfortTemperatureSetpoint, thermostat:coolingModeDayTemperatureSetpoint, thermostat:coolingModeNightTemperatureSetpoint, thermostat:coolingModeSafeTemperatureSetpoint, operatingMode and thermostat:mode) and thermostat trigger channels: thermostat:heater, thermostat:boost, thermostat:pump, thermostat:cooler, thermostat:alarm1, thermostat:alarm2, thermostat:alarm3, thermostat:alarm4. They also have two channels to control the module's display oledDisplay:MEMO and oledDisplay:SCREENSAVER.

Thing type vmbmeteohas 8 trigger channels (input:CH1 ... input:CH8). These channels will be triggered by the module's alarms. It has a number of channels to set the module's alarms: clockAlarm:clockAlarm1Enabled, clockAlarm:clockAlarm1Type, clockAlarm:clockAlarm1WakeupHour, clockAlarm:clockAlarm1WakeupMinute, clockAlarm:clockAlarm1BedtimeHour, clockAlarm:clockAlarm1BedtimeMinute, clockAlarm:clockAlarm2Enabled, clockAlarm:clockAlarm2Type, clockAlarm:clockAlarm2WakeupHour, clockAlarm:clockAlarm2WakeupMinute, clockAlarm:clockAlarm2BedtimeHour and clockAlarm:clockAlarm2BedtimeMinute. It also has a number of channels to read out the weather station's sensors: weatherStation:temperature, weatherStation:rainfall, weatherStation:illuminance and weatherStation:windspeed.

Thing types vmbpirc and vmbpirm have 7 trigger channels input:CH1 ... input:CH7. Additionally, these modules have a number of channels to set the module's alarms: clockAlarm:clockAlarm1Enabled, clockAlarm:clockAlarm1Type, clockAlarm:clockAlarm1WakeupHour, clockAlarm:clockAlarm1WakeupMinute, clockAlarm:clockAlarm1BedtimeHour, clockAlarm:clockAlarm1BedtimeMinute, clockAlarm:clockAlarm2Enabled, clockAlarm:clockAlarm2Type, clockAlarm:clockAlarm2WakeupHour, clockAlarm:clockAlarm2WakeupMinute, clockAlarm:clockAlarm2BedtimeHour and clockAlarm:clockAlarm2BedtimeMinute.

The trigger channels can be used as a trigger to rules. The event message can be PRESSED, RELEASEDor LONG_PRESSED.

To remove the state of the Item in the Sitemap for a button channel. Go to the Items list, select the Item, add a State Description Metadata, and set the Pattern value to a blank space.

# Full Example

.things:

Bridge velbus:bridge:1 [ port="COM1"] {
    vmb2ble     01
    vmb2pbn     02
    vmb6pbn     03
    vmb8pbu     04
    vmb7in      05
    vmb4ryld    06
    vmb4dc      07
    vmbgp1      08
    vmbgp2      09
    vmbgp4      0A
    vmbgp4pir   0B
    vmbgpo      0C
    vmbgpod     0D
    vmbpiro     0E
}

.items:

Switch LivingRoom           {channel="velbus:vmb4ryld:1:06:CH1"}                # Switch for onOff type action
Switch KitchenButton        {velbus:vmb2pbn:1:05:button#CH1}                    # Switch for Pressed and Long_Pressed type actions
Dimmer TVRoom               {channel="velbus:vmb4dc:1:07:CH2"}                  # Changing brightness dimmer type action
Rollershutter Kitchen       {channel="velbus:vmb2ble:1:01"}                     # Controlling rollershutter or blind type action

Number Temperature_LivingRoom   "Temperature [%.1f °C]"     <temperature> channel="velbus:vmbgp1:1:08:CH09"}  
Number Temperature_Corridor   "Temperature [%.1f °C]"     <temperature> channel="velbus:vmbgpo:1:0C:CH33"}  
Number Temperature_Outside   "Temperature [%.1f °C]"     <temperature> channel="velbus:vmbpiro:1:0E:CH09"}  

.sitemap:

Switch item=LivingRoom
Slider item=TVRoom
Switch item=TVRoom          # allows switching dimmer item off or on
Rollershutter item=Kitchen

Switch item=KitchenButton # Press and Long_Pressed message are available
# or
Switch item=KitchenButton mappings=[PRESSED="Push"] # only the Pressed message is send on the bus
# or
Switch item=KitchenButton mappings=[LONG_PRESSED="Push"] # only the Long_Pressed message is send on the bus

Example trigger rule:

rule "example trigger rule"
when
    Channel 'velbus:vmb7in:1:05:CH5' triggered PRESSED
then
    var message = receivedEvent.getEvent()
    logInfo("velbusTriggerExample", "Message: {}", message)
    ...
end